Looking for Answers about TREXLER Kwik Klip Remington Model 700 Clip Conversion Kit?

Customer questions and answers for
TREXLER Kwik Klip Remington Model 700 Clip Conversion Kit

Instantly turns your Remington Model 700 into a clip gun for fast and efficient reloading in the woods. Kit comes with a four-round steel box magazine and a precision-cast aluminum trigger guard - both are finished and fit like factory components. Center-Bore feeding system for smooth chambering. Installs quickly in 700 BDL, 700 Classic and 725 rifles. Minor inletting required for 700 ADL or 721. Will work with the following calibers: .25-06, .264 Win. Mag., .270 Win., .280 Rem., 7mm Exp., 7mm Mauser, 7mm Rem. Mag., .30-06, and .300 Win. Mag. Available: Kwik Klip Kit Four-Round Kwik Klip 10-Round Kwik Klip
Customer questions and answers:
66 Questions
 | 
142 Answers
Overall rating:
4.179 out of 5
4.2
out of
5

Customer questions and answers for TREXLER Kwik Klip Remington Model 700 Clip Conversion Kit

Question

Will the Kwik Klip Conversion Kit work on a Remington 700 BDL in 6mm?

Thank You.
Country: United States
State: Virginia
Age: 56-65
Gender: Male
asked 1 month, 1 week ago
Customer avatar
by
Remingtonnumber1114
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, does not fit any short action Remington 700 rifle, which would include 6mm.
answered 1 month, 1 week ago
Customer avatar
by
CabelasExpert15
0points
0out of 0found this answer helpful.
Question

will the Kwik Klip Remington Model 700 Clip Conversion Kit work for a remington 770?

Country: United States
State: California
Age: 26-35
Gender: Male
asked 1 year, 7 months ago
Customer avatar
by
cowboy1981
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item number IK-226539, is not compatible with the Remington 770.
answered 1 year, 7 months ago
Customer avatar
by
CabelasExpert1
0points
0out of 0found this answer helpful.
answer 2
not easily, it wasn't made to fit that gun, they are differnt.
Country: United States
State: Utah
Age: 36-45
Gender: Male
answered 1 year, 7 months ago
Customer avatar
by
longrangeshooter6
0points
0out of 0found this answer helpful.
answer 3
Unfortunately your rifle was never intended for any "upgrades". It is an entry level unit. I would suggest investigating the new 783 if you don't want to spring for a 700. :)
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 2 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

Will this work with my 700 7mm if I already have the hinged door?

Will this work with my 700 7mm if I already have the hinged door?

I'm nit sure if this is an original part or an after market. Just wanted to know if the kwik magazine will fit?
Country: United States
State: New Jersey
Age: 26-35
Gender: Male
asked 1 year, 7 months ago
Customer avatar
by
Sorb555
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item # IK-226539, is compatible with Remington 700 long-action with drop down floor plate (BDL, CDL, XCR, SPS) & Remington 725 rifles.
answered 1 year, 7 months ago
Customer avatar
by
CabelasExpert21
+1point
1out of 1found this answer helpful.
answer 2
I assume you mean a 7mm Remington magnum? You'll need to buy the conversion kit that included the trigger guard and magazine. It will hold three 7mm Rem Mag cartridges.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
answer 3
Sounds like you have a BDL model in which case it should fit just fine.
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 2 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

Will this install on Police Model .308

Country: United States
asked 1 year, 5 months ago
Customer avatar
by
MP700
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item # IK-226539, is designed for long actions. This conversion kit will not work with the .308 rifle.
answered 1 year, 5 months ago
Customer avatar
by
CabelasExpert21
+2points
2out of 2found this answer helpful.
answer 2
The police Model 308 is a short action. Won't work.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
answer 3
Unfortunately the Rem 700 in .308 is a short action rifle. As of now Kwik Klip only manufactures one for the long action. Look Axxxrate Mag for a top notch affordable bottom metal magazine system. :)
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 2 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

Wil this fit in the Remington 700 Police .300 Win Mag?

Will this fit okay in the Remington 700 Police .300 Win Mag? I understand this is made for long action, but I'm moreso wondering if any modifications/inletting will be required for it to fit with the stock.
Country: United States
State: Oregon
asked 1 year, 4 months ago
Customer avatar
by
FastMelodic
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item number IK-226539, is compatible with the firearm in question. Minor modifications would be required.
answered 1 year, 4 months ago
Customer avatar
by
CabelasExpert1
0points
0out of 0found this answer helpful.
answer 2
I can only speak for my 30-06, although the description does say that it will fit .300 Win Mag. There was no change required to the inletting at all. It was a perfect fit and the shells cycle perfectly. It is well made and I am very happy with the results. It looks almost as good as the Remington made DM, costs much less than the DM stock and bottom metal and performs just as well in my opinion.
Country: United States
State: Connecticut
Age: 46-55
Gender: Male
answered 1 year, 3 months ago
Customer avatar
by
Billy59
0points
0out of 0found this answer helpful.
answer 3
Pretty much a drop in affair.
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 2 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

Has anyone installed this kit on a...

Has anyone installed this kit on a BLACKHAWK! KNOXX Axiom Ultra-Light L/A Rifle Stock set up? I would love to have kit, but curious if anyone has done it.
Country: United States
State: Florida
Age: 46-55
Gender: Male
asked 5 months, 3 weeks ago
Customer avatar
by
JammerJim
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
I installed this on Blackhawk axiom stock with 700 la 30 06 fit perfect whole new feel to the weapon no fumbling with the ammo.
Country: United States
State: California
Age: 56-65
Gender: Male
answered 5 months, 2 weeks ago
Customer avatar
by
drivermike
0points
0out of 0found this answer helpful.
answer 2
Actually, yes. Not the Axiom, but the Knox thumbhole (which is quite similar with it's recoil reducing qualities). Magazine is a little sloppy and the retaining tab has a habit of bending downwards but hey, for the money it works pretty darn good while giving me a lot more firepower. Watch your spacing when installing the action into the stock (that's what those little spacers are for) or you'll wind up scraping your bolt against the top of the magazine every time you cycle. Hope that helps.
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 2 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

What is the internal length of this magazine? Will it hold a 3.6" cartridge? 300 win is around 3.3" but I need a 3.6" box.

Country: United States
State: Missouri
Age: 36-45
Gender: Male
asked 2 months ago
Customer avatar
by
mobio
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, can
accommodate round up to a maximum of 3.5 inches long.
Country: United States
answered 2 months ago
Customer avatar
by
CabelasExpert11
+1point
1out of 1found this answer helpful.
Question

Will this work on the Remington 700 CDL LH model

Country: United States
State: Texas
Gender: Male
asked 6 months ago
Customer avatar
by
Nick2598
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, will work for left handed Remington 700 CDL's that are long action.
answered 6 months ago
Customer avatar
by
CabelasExpert14
0points
0out of 0found this answer helpful.
Question

will this work on a Remington sportsman 78 30-06

asked 6 months ago
Customer avatar
by
Anonymous
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, only works on the Remington 700 style actions.
answered 6 months ago
Customer avatar
by
CabelasExpert14
0points
0out of 0found this answer helpful.
Question

700 ADL 7mm mag

My final goal is to install the blackhawk axiom u/l stock. Converting my rifle to a BDL is step 1. I notice you say some wood and inletting has to be removed prior to installation. Does anyone have any detail info on how and what is involved in that?
Country: United States
State: Texas
Age: 26-35
Gender: Male
asked 10 months ago
Customer avatar
by
Pshatt
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
My rifle was also an ADL, but I ordered a laminate stock for a BDL and it went right in. Any small gaps were filled when I did the glass bedding. Unless you are a fairly good woodworker or have done stock work before, save yourself the frustration and order your new stock and do the conversion at the same time. Good luck!
Country: United States
State: Idaho
Age: 56-65
Gender: Male
answered 8 months ago
Customer avatar
by
Robb57
0points
0out of 0found this answer helpful.
answer 2
I installed a Kwik Klip on my Rem 700 270 Win. with very little dificulty. After removing the internal Rem clip and trigger guard, the conversion kit which includes the trigger guard and clip holder as one piece slipped right in without having to remove any material from the Rem stock. I'm not sure about the blackhawk stock. I have used the conversion kit for about 5 years with no problems.
Country: United States
State: New Jersey
Age: 65 and over
Gender: Male
answered 8 months ago
Customer avatar
by
RWB2
0points
0out of 0found this answer helpful.
answer 3
The Kwik Klip Remington Model 700 Clip Conversion Kit, item – 226539. When installing on a 700 ADL with a wood stock (without a bottom drop floor plate) wood would need to be removed from the bottom of the stock to allow this to be installed, minor inletting/sanding may be required on the inside of the stock for proper fit.
answered 7 months ago
Customer avatar
by
CabelasExpert46
0points
0out of 0found this answer helpful.
Question

Will this work with the 700 bdl 30-06

before ordering i have the bdl model with the internal 4 round mag will the kit work if i do the wood work?
asked 1 year, 7 months ago
Customer avatar
by
hightvictor
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item # IK-226539, installs quickly in 700 BDL. Will work with the following calibers: .25-06, .264 Win. Mag., .270 Win., .280 Rem., 7mm Exp., 7mm Mauser, 7mm Rem. Mag., .30-06, and .300 Win. Mag.
answered 1 year, 7 months ago
Customer avatar
by
CabelasExpert15
0points
0out of 0found this answer helpful.
answer 2
yes, but don't expect high end bottom metal. Personal experience. As of last check, only for L/A.
Country: United States
State: Arizona
Age: 46-55
Gender: Male
answered 8 months ago
Customer avatar
by
chancezz
0points
0out of 0found this answer helpful.
Question

I own a remington 700 SPS in .243 . will this fit the rifle?

Country: Australia
Age: 46-55
Gender: Male
asked 1 year, 1 month ago
Customer avatar
by
Anonymous
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, only works for long action cartridges. The .243 Win is a short action cartridge.
answered 1 year, 1 month ago
Customer avatar
by
CabelasExpert14
+1point
1out of 1found this answer helpful.
answer 2
No it will not fit. .243 is a short action and the Kwik Klip is only for the long actions. like 30-06.
Country: United States
State: Oregon
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
Thehenrys97016
0points
0out of 0found this answer helpful.
Question

Will tbis work on a remington 700 bdl 338 win mag?

Country: United States
State: Georgia
Age: 36-45
Gender: Male
asked 10 months ago
Customer avatar
by
dpmathison
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item: IK-226539, will not work with a .338 Win Mag.
answered 10 months ago
Customer avatar
by
CabelasExpert10
+1point
1out of 1found this answer helpful.
Question

What width case will fit the magazine?

Hi there, we have a few of the 338/300 Norma mags built on some Remington 700's and I am curious on using the Kwik Klip system with them. They were designed for a standard 700 Long Action but are an extremely wide case body however. Length of them is similar to a 280 Remington so that's not an issue, I just need to know if the magazine will fit the wide case body. Thank you.
Country: United States
State: Washington
Gender: Male
asked 1 year ago
Customer avatar
by
HCA509
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item: IK-226539, is a complete kit added to the rifle, not a clip only.
answered 1 year ago
Customer avatar
by
CabelasExpert18
-1point
0out of 1found this answer helpful.
Question

Will this work for a 300 ultra mag

Country: United States
State: Louisiana
Age: 26-35
Gender: Male
asked 1 year, 9 months ago
Customer avatar
by
boo410
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item # IK-226539, is designed to work on long action calibers. The .300 Remington Ultra Mag is considered a long action magnum caliber and will be compatible with this conversion kit.
answered 1 year, 9 months ago
Customer avatar
by
CabelasExpert4
+2points
3out of 4found this answer helpful.
answer 2
The ultra mag is built on a short action rifle. The Kwik Klip is for a long action Mod 700.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
-3points
0out of 3found this answer helpful.
Question

If I buy the conversion kit, will it take a different remington 700 7mm-08 clip, because I've been looking and I found a Remington 700 7mm-08 clip

Country: United States
State: North Carolina
asked 1 year, 6 months ago
Customer avatar
by
CaptJack22
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, only takes Kwik Klip magazines and only works for long action calibers at this time. 7mm-08 is a short action caliber.
answered 1 year, 6 months ago
Customer avatar
by
CabelasExpert14
+2points
2out of 2found this answer helpful.
answer 2
Won't work.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
Question

Will it work with a 7mm-08?

Country: United States
State: North Carolina
asked 1 year, 6 months ago
Customer avatar
by
CaptJack22
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, Item # IK-226539, will only work with long action cartridges. The 7mm-08 is a short action cartridge and will not work with this item.
answered 1 year, 5 months ago
Customer avatar
by
CabelasExpert3
0points
0out of 0found this answer helpful.
answer 2
Most 7mm-08 rifles are built on the short action. The Kwik Klip is only for the Long Action Rem 700.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
Question

would a different remington 700 7mm-08 clip work just as well and still fit

Country: United States
State: North Carolina
asked 1 year, 6 months ago
Customer avatar
by
CaptJack22
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item number IK-226539, is not compatible with short action calibers like the 7mm-08.
answered 1 year, 5 months ago
Customer avatar
by
CabelasExpert1
0points
0out of 0found this answer helpful.
answer 2
The Kwik Klip is made for Model 700 long action rifles. It functins only with the magazines made for the Kwik Klip.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
Question

remington 700

I have the Remington 700aac-sd I was wondering if the
kwick clip will work for it.
Country: United States
State: Oregon
Age: 36-45
Gender: Male
asked 1 year, 6 months ago
Customer avatar
by
Deacon12
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Kwik Klip Remington Model 700 Clip Conversion Kit, item number IK-226539, is not compatible with short action cartridges like the .300 AAC.
answered 1 year, 6 months ago
Customer avatar
by
CabelasExpert1
0points
0out of 0found this answer helpful.
answer 2
The Kwik Klip is made only for Long Action Model 700.

The 700aac-sd is a short action.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
Question

Will the 10rd clip work with a 700sps that already has a factory detachable magazine , or do you have to purchase the kwik klip conversion kit too?

Country: United States
State: Texas
Age: 26-35
Gender: Male
asked 1 year, 6 months ago
Customer avatar
by
Tx03
on Kwik Klip Remington Model 700 Clip Conversion Kit
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
To use the 10 round clip it requires the Kwik Klip Remington Model 700 Clip Conversion Kit, item # IK-226539, installed on the firearm.
answered 1 year, 6 months ago
Customer avatar
by
CabelasExpert21
0points
0out of 0found this answer helpful.
answer 2
The magazines won't interchange with the Remington factory detachable magazine.
Country: United States
State: Colorado
Age: 65 and over
Gender: Male
answered 1 year, 2 months ago
Customer avatar
by
JPerryE
0points
0out of 0found this answer helpful.
1 2 3 4 next>>