Looking for Answers about NAP NAP QuickFletch Twister Vanes?

Customer questions and answers for
NAP NAP QuickFletch Twister Vanes

If you can boil water, you can professionally fletch and crest your arrows in seconds. Align the QuikFletch on the shaft and hold it in place. Dip the QuikFletch and shaft into boiling water, nock end first, then remove the shaft and you’re done. The wrap shrinks instantly to fit any size arrow shaft. Hot water activates a patented adhesive on the inside of the wrap, eliminating the use of messy glues or tape. Micro Grooves on the Twister vanes deliver a flatter trajectory, while rotating the vanes twice as fast as conventional vanes. Black tube Twister Vanes. Per 6. Colors: Fluorescent Orange, Fluorescent Green.
Customer questions and answers:
6 Questions
 | 
18 Answers
Overall rating:
4.5 out of 5
4.5
out of
5

Customer questions and answers for NAP NAP QuickFletch Twister Vanes

Question

In the description it says theres 6 per pack.does it mean 6 individual ones, or for 6 arrows so 18 total?

Country: United States
State: California
Age: Under 25
Gender: Male
asked 1 year, 5 months ago
Customer avatar
by
BullseyeMonitor
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
4 answers
Answers
answer 1
The NAP QuickFletch Twister Vanes, item # IK-460479, will fletch 6 arrows.
answered 1 year, 5 months ago
Customer avatar
by
CabelasExpert21
+1point
1out of 1found this answer helpful.
answer 2
each pack will fletch 6 arrows
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
0points
0out of 0found this answer helpful.
answer 3
6 individual sets = 6 arrows total
Country: United States
State: Wisconsin
Age: 26-35
Gender: Male
answered 9 months ago
Customer avatar
by
jcott948
0points
0out of 0found this answer helpful.
answer 4
they shoot fine through a biscuit but remember the biscuit will pull at the leading edge of ANY vane. the Quikfletch just makes it easier to re-fletch when that leading edge starts to pull away from the arrow shaft
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
-1point
0out of 1found this answer helpful.
Question

Do these fit small diameter shafts?

I shoot Easton Axis FMJ shafts, will these fit tight?
Country: United States
State: Missouri
Age: 26-35
Gender: Male
asked 1 year, 6 months ago
Customer avatar
by
STLbucks
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The NAP QuickFletch Twister Vanes, Item: IK-460479, shrinks to fit any size carbon or aluminum arrow shaft.
answered 1 year, 6 months ago
Customer avatar
by
CabelasExpert40
0points
0out of 0found this answer helpful.
answer 2
Yes they do, I have used them on Easton Axxis 400, Easton Flatline 400 and now this year the Easton Hexx 400 which both are small diameter. they shrink right to the smaller shaft just fine
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
0points
0out of 0found this answer helpful.
answer 3
For sure! I use them on my Axis and they haven't moved.
Country: United States
State: Wisconsin
Age: 26-35
Gender: Male
answered 9 months ago
Customer avatar
by
jcott948
0points
0out of 0found this answer helpful.
Question

Quikfletch for crossbow bolts?

will item IK-460479 work on crossbow bolts?
If not do you have any that will?
Country: United States
State: Virginia
Age: 46-55
Gender: Male
asked 1 year, 10 months ago
Customer avatar
by
gunhunter4
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The NAP QuickFletch Twister Vanes, item # IK:460479, are not designed to be used on crossbow bolts. The offset of the vanes are designed to twist the arrow, and since a crossbow bolt is shot down a channel on the crossbow, the bolt is not able to twist, thus damaging the vane.
answered 1 year, 10 months ago
Customer avatar
by
CabelasExpert16
0points
0out of 0found this answer helpful.
answer 2
yes they do work on bolts
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
0points
0out of 0found this answer helpful.
answer 3
yes they make a quick fletch for crossbow bolts. Look under arhery and subcategory > Fletching,Nocks& Jigs.
then just schroll down through products till you find them.
Country: United States
State: Alabama
Age: 36-45
Gender: Male
answered 1 year, 8 months ago
Customer avatar
by
bamabuck08
0points
0out of 0found this answer helpful.
Question

can i use glue for these instead of just hot water?

I perfer to use instant glue when i repair my arrows, would i be able to use glue on these? And would it be effective in keeping them attached?
Country: United States
State: California
Age: Under 25
Gender: Male
asked 1 year, 5 months ago
Customer avatar
by
BullseyeMonitor
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The NAP QuickFletch Twister Vanes, item # IK-460479, were designed to be shrunk onto the arrow shaft using boiling water. We do offer the NAP Twister Vanes, item # IK-418560, that are just the vanes for glue applications. Below is a link to the Twister Vanes.

http://www.cabelas.com/product/NAP-...
answered 1 year, 5 months ago
Customer avatar
by
CabelasExpert21
0points
0out of 0found this answer helpful.
answer 2
It is a shrink wrap, when you add the heat from boiling water the wrap shrinks to seal around the shaft of the arrow. you would not be happy trying to glue them, just try them with hot water and you will see how it goes
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
0points
0out of 0found this answer helpful.
answer 3
No you can't. If you have ever used shrink-tubing for electrical wiring, it is exactly the same. The vanes are attached to the shrink-tubing.
Country: United States
State: Wisconsin
Age: 26-35
Gender: Male
answered 9 months ago
Customer avatar
by
jcott948
0points
0out of 0found this answer helpful.
Question

Can I put a broadhead on this?

asked 1 year, 7 months ago
Customer avatar
by
croken
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The NAP QuickFletch Twister Vanes, item # IK-460479, are vanes only and do not include an arrow. Once the vanes are fletched on to an arrow, a broadhead could be used.
answered 1 year, 7 months ago
Customer avatar
by
CabelasExpert15
0points
0out of 0found this answer helpful.
answer 2
I shoot the Quikfletch Twister with a 4 blade SlickTrick, flies like a dream
Country: United States
State: Ohio
Age: 26-35
Gender: Male
answered 8 months ago
Customer avatar
by
guthook16
0points
0out of 0found this answer helpful.
answer 3
No, you need arrows to put these onto as well as the broadheads.
Country: United States
State: Wisconsin
Age: 26-35
Gender: Male
answered 9 months ago
Customer avatar
by
jcott948
0points
0out of 0found this answer helpful.
Question

do these shoot good through whisker biscuit?

asked 2 years, 1 month ago
Customer avatar
by
deerkiller56734
on NAP QuickFletch Twister Vanes
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Since the NAP QuickFletch Twister Vanes are short, they work very well with Whicker Biscuit arrow rests.
answered 2 years, 1 month ago
Customer avatar
by
CabelasExpert5
+1point
1out of 1found this answer helpful.
answer 2
Yes i have medium size biscuit and the small vane size doesn't make alot of surface contact like the 4 inch I use to shot through it.
Country: United States
State: Alabama
Age: 36-45
Gender: Male
answered 1 year, 8 months ago
Customer avatar
by
bamabuck08
0points
0out of 0found this answer helpful.
1 of 1