Looking for Answers about SITE LITE Site Lite SL-100 Boresighter?

Customer questions and answers for
SITE LITE Site Lite SL-100 Boresighter

Before you head to the range, get superior boresighting accuracy using the latest laser technology from Site Lite. Super-strong magnets in the arbor securely center the laser in the muzzle for consistent accuracy. Unique system of adapters and O-rings fits all .22- to .50-caliber handguns and rifles; 20- and 12-gauge shotguns and muzzleloaders. Designed so no metal touches the rifling of your firearm. To boresight, place the target 25 ft. from the muzzle and center the laser on the target. Dial in the scope's crosshairs and you're boresighted for 100 yards. The included Alignment Verification System Reflective Target lets you quickly verify scope alignment in the field according to your recorded information.
Customer questions and answers:
22 Questions
 | 
45 Answers
Overall rating:
4.586 out of 5
4.6
out of
5

Customer questions and answers for SITE LITE Site Lite SL-100 Boresighter

Question

laser bore site

I have a Winchester Model 70 with the factory muzzle brake. Which bore sire would be the best for this set up.
Country: United States
State: Indiana
Age: 46-55
Gender: Male
asked 9 months ago
Customer avatar
by
catman224
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
All (3) SiteLite boresighter models (SL-100, SL-150, SL-500) use the same standard size shaft. The standard size shaft will fit most factory brakes and flash hiders. Each boresighter will fit a muzzle brake that is 3 inches in length or shorter for .30 caliber barrels. Keep in mind the most accurate method to boresight will be to remove the muzzle brake if possible. Most brakes or hiders are not installed true to the middle of the bore. All (3) models are equally accurate to one another, come with the same accessories and lifetime warranty.
answered 9 months ago
Customer avatar
by
T.J.
+1point
1out of 1found this answer helpful.
Question

What is the mW measurement?

What is the mW measurement?
Country: United States
State: Pennsylvania
Age: 26-35
Gender: Male
asked 5 months, 1 week ago
Customer avatar
by
Zeol
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
The SL-100 uses a Class IIIa red 650NM laser. The maximum output will never exceed 5.0mW.
answered 5 months, 1 week ago
Customer avatar
by
T.J.
+2points
2out of 2found this answer helpful.
Question

Will this work to sight in an eotech at 50yards on my shotgun?

Country: United States
State: Ohio
Age: 26-35
Gender: Male
asked 5 months ago
Customer avatar
by
Robert75
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Yes, the SL-100 will work with red dot scopes. You can also use our BTS program to boresight for a 50 yard zero with your shotgun.
answered 4 months, 4 weeks ago
Customer avatar
by
T.J.
+1point
1out of 1found this answer helpful.
Question

I have a "fixed" birdcage flash hider on the end of my AR (awesome NJ laws, we cannot have threads). Will this work?

Country: United States
State: New Jersey
Age: 26-35
Gender: Male
asked 1 month ago
Customer avatar
by
2ndRights4All
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Our boresighter will fit standard "birdcage" hiders. Depending on the caliber size, that will determine how far the shaft will go down the barrel. For example a .223 / 5.56mm caliber barrel, any hider, brake, or suppressor cannot exceed roughly 1.5 inches in length. For a .308 / 7.62mm caliber, the muzzle brake, flash hider, or suppressor cannot exceed roughly 3 inches in length.
answered 1 month ago
Customer avatar
by
T.J.
0points
0out of 0found this answer helpful.
Question

Would it work on a 22 WMR ?

Country: United States
State: Michigan
Age: Under 25
Gender: Male
asked 3 years, 1 month ago
Customer avatar
by
William60
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Site Lite SL-100 Boresighter, # IK-712123, will work on a .22 WMR barrel.
Country: United States
answered 3 years, 1 month ago
Customer avatar
by
CabelasExpert11
+1point
2out of 3found this answer helpful.
answer 2
yes it will
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
+1point
1out of 1found this answer helpful.
Question

Flash suppresor

Will this work with a flash suppressor in place?
Country: United States
State: Missouri
Age: 46-55
Gender: Male
asked 3 years, 11 months ago
Customer avatar
by
Oregoianinmissouri
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
If the o-ring on the spud will enter and fit the bore, and the conical portion of the SL 100 fits snugly into and against the front of the suppressor, it will work. One caveat here. The flash suppressor must be mounted true to the bore, as any misalignment here will cause error in sighting in.
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 3 years, 10 months ago
Customer avatar
by
KD6T
+3points
3out of 3found this answer helpful.
answer 2
The Site Lite SL-100 Boresighter Item # IK-712123, will work with AR-15's with flash suppressors shorter than 3 inches in length.
answered 3 years, 5 months ago
Customer avatar
by
CabelasExpert14
+3points
3out of 3found this answer helpful.
Question

Will the boresight work on stainless steel barrels?

Country: United States
State: South Carolina
Age: 26-35
Gender: Male
asked 3 years, 8 months ago
Customer avatar
by
Parshot
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Site Lite SL-100 Boresighter, item # IK-712123, is compatible with stainless steel barrels.
answered 3 years, 8 months ago
Customer avatar
by
CabelasExpert4
+2points
2out of 2found this answer helpful.
answer 2
Yes....it has rubber o-rings that are sized for correct caliber that hold it into the barrel.
Country: United States
State: Alaska
Age: 46-55
Gender: Male
answered 3 years, 7 months ago
Customer avatar
by
alaskanmike63
+2points
2out of 2found this answer helpful.
Question

In sighting in a XD Springfield 45 pistol, how the would the distance work in terms of sighting since on is not going out "100 yds" but needs to clos

asked 3 years, 9 months ago
Customer avatar
by
five2
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
I just line up my sights with the laser light at 15-25 yards and call it good with my pistols.
Country: United States
State: Montana
Age: 36-45
Gender: Male
answered 2 years, 5 months ago
Customer avatar
by
stuntmanmk
+3points
3out of 3found this answer helpful.
answer 2
The purpose of a boresiter is to get you "on the paper", not a perfect zero. I have been shooting pistols of all kinds for over 50 years and have never considered using this tool to sight in. Put up a target at 20 yards and start shooting, and correct to suit. If you are using a scope on your .45, the included instructions will show you how to place the dot below the bulls eye.
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 1 year, 11 months ago
Customer avatar
by
KD6T
0points
0out of 0found this answer helpful.
Question

Does this item work in meters? or only with yards, feets...?

Country: Spain
Age: 26-35
Gender: Male
asked 3 years, 6 months ago
Customer avatar
by
Trepason
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Site Lite SL-100 Boresighter, # IK-712123

This laser bore-sight is not metric specific. You may use it
with standard and metric targets and scopes.
Country: United States
answered 3 years, 6 months ago
Customer avatar
by
CabelasExpert11
0points
1out of 2found this answer helpful.
answer 2
Virtually all boresights work independent of the unit of reference (metric, english, whatever). There are plenty of metric conversions (online) that provide the information you would need.
Country: United States
State: New Jersey
Age: 56-65
Gender: Male
answered 3 years, 6 months ago
Customer avatar
by
RPrich
0points
0out of 0found this answer helpful.
Question

does this work well for pistols?

Age: 46-55
Gender: Male
asked 3 years, 4 months ago
Customer avatar
by
HawaiiT
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Site Lite SL-100 Boresighter, item # IK-712123, is designed for use with rifles, shotguns and muzzleloading rifles.
answered 3 years, 4 months ago
Customer avatar
by
CabelasExpert15
+1point
4out of 7found this answer helpful.
answer 2
yes
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
-2points
0out of 2found this answer helpful.
Question

I just purcchased a .257 Roberts from your store and need a bore sight for it. Which one would you suggest without breaking my bank>

Country: United States
State: Connecticut
Age: 65 and over
Gender: Male
asked 2 years, 10 months ago
Customer avatar
by
WilliJ
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The ideal bore sighter for a hunting rifle is the Cabela's Bore Site Package - Item: IK-713781. It is an optic glass sighter that will set a standard scope on a flat weber rail to 100 yds. by optics rather than laser light and does not require a very large yard or range. It can be done on the kitchen table. This sighter will not work for any scope that is elevated more than 1.5 inches above bore center. Measure from center of scope to center of bore. As always final alignment is done by live fire on the range in order to calibrate for bullet type etc.
Country: United States
State: Arizona
Age: 36-45
Gender: Female
answered 1 year, 4 months ago
Customer avatar
by
Nathine
0points
0out of 0found this answer helpful.
answer 2
I have a site lite sl-100 for years, very well made and accurate!! Will put you on paper at 50 yds!!
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
+2points
2out of 2found this answer helpful.
Question

does the bore site

come with the reflective target grid part of this boresighter or do I need to get boresighting accessory kit
thanks
paozzie
Country: United States
State: Pennsylvania
Age: 56-65
Gender: Male
asked 2 years, 5 months ago
Customer avatar
by
paozzie
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Yes it comes with the reflective target. The reflective target is a 3/4 inch reflective circle on a white target with grid.
Country: United States
State: Montana
Age: 36-45
Gender: Male
answered 2 years, 5 months ago
Customer avatar
by
stuntmanmk
0points
0out of 0found this answer helpful.
answer 2
The Site Lite SL-100 Boresighter, Item # IK-712123, includes the:
Alignment Verification System Reflective Target.
Country: United States
answered 2 years, 5 months ago
Customer avatar
by
CabelasExpert11
0points
0out of 0found this answer helpful.
Question

does the sl-100 come with a scope leveler

The description for the SL100 does not reference the scope leveler as it does for the SL150 yet some Q&A suggest the SL100 does have a scope leveler. Does the*SL100*have the scope leveler?
Country: United States
State: Massachusetts
Age: 36-45
Gender: Male
asked 2 years, 4 months ago
Customer avatar
by
littlekid
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
The Site Lite SL-100 Boresighter, item # IK:712123, will include the following:

- SRL-100 Scope Reticle Leveler
- Laser Boresighting Target
- Rugged Carrying Case
- Ballistic Targeting System Software
- Sight Alignment Verification Target
answered 2 years, 3 months ago
Customer avatar
by
CabelasExpert16
+9points
9out of 9found this answer helpful.
answer 2
Yes, it did. No level included, but your laser will project a line on the target. Actually, the line can be adjusted at any angle. With a little ingenuity, You'll do fine.
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 1 year, 11 months ago
Customer avatar
by
KD6T
+1point
2out of 3found this answer helpful.
Question

Will this work with a 50. cal. muzzleloader and 12 ga shotgun?

T/C PRO HUNTER 50. CAL
Country: United States
State: Indiana
Age: 56-65
Gender: Male
asked 2 years, 2 months ago
Customer avatar
by
WOODIEB
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Yes, you're good to go for .50 and 12GA. I used a pair of these boresighters to determine the collimation on a double barreled shotgun that I was converting to a double rifle in .45-70. It was the perfect tool(s) for the job.
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 1 year, 11 months ago
Customer avatar
by
KD6T
0points
0out of 0found this answer helpful.
answer 2
The Site Lite SL-100 Boresighter, item number IK-712123, will work with your 50 cal. and 12 gauge.
answered 2 years, 2 months ago
Customer avatar
by
CabelasExpert39
+1point
1out of 1found this answer helpful.
Question

Is there a scope leveler in this system? If so how does it work?

Country: United States
State: Wyoming
Age: 26-35
Gender: Male
asked 2 years, 6 months ago
Customer avatar
by
wyodoc
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
There is an attachment that projects a straight laser line on the target. You can spin the attachment until the line is straight up and down on the target then you spin your scope until the vertical sight thread lines up with the red laser line. A rifle stand works best for this as well as a dim room since the laser is dimmer with this attachment.
Country: United States
State: Montana
Age: 36-45
Gender: Male
answered 2 years, 5 months ago
Customer avatar
by
stuntmanmk
0points
0out of 0found this answer helpful.
answer 2
The Site Lite SL-100 Boresighter, item # IK-712123, does not include a scope leveler.
Country: United States
answered 2 years, 5 months ago
Customer avatar
by
CabelasExpert5
+1point
1out of 1found this answer helpful.
Question

re: SL 100 boresighter

I own one of these and recently had an issue while trying boresight my Henry 44mag rifle. I couldn't get the o ring to go into the barrel. Is there a place to purchase new o rings etc. for this boresighter.
Age: 65 and over
Gender: Male
asked 4 years, 5 months ago
Customer avatar
by
Anonymous
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Go to any well equipped hardware store and look for their o-rings. Pick one that fits the SL100 and also fits the bore, and you will be fine. There is no magic here.

Be sure you lubricate the o-ring prior to attempting to insert it into the bore. The instructions say to avoid "solvent" type lubricants to avoid eating the o-rings with some of these chemical rich bore cleaners. I used olive oil. Any veggie oil should be fine, and not bother the o-ring.
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 3 years, 10 months ago
Customer avatar
by
KD6T
+1point
1out of 1found this answer helpful.
answer 2
Additional o-rings for the Site Lite SL-100 Boresighter can be obtained by contacting the manufacturer.

Here is a link to contact Site Lite: http://www.sitelite-lasers.com/main...
answered 4 years, 5 months ago
Customer avatar
by
CabelasExpert1
0points
0out of 0found this answer helpful.
Question

Will this boresight work with rugged 22lr, .Stevens an savage30-06 and dpms arms223/556 ?

Country: United States
State: Florida
Age: 56-65
Gender: Male
asked 3 years, 2 months ago
Customer avatar
by
Anonymous
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Site Lite SL-100 Boresighter, Item: IK-712123, will work in all caliber weapons from .22 caliber to .50 caliber.
answered 3 years, 1 month ago
Customer avatar
by
CabelasExpert3
+3points
4out of 5found this answer helpful.
answer 2
yes
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
+2points
2out of 2found this answer helpful.
Question

What accessories are included in the Site Lite SL 100 kit?

Age: 56-65
Gender: Male
asked 4 years, 4 months ago
Customer avatar
by
Gprice8
New Jersey
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
From the manufacturer:
"Unique system of adapters and O-rings fits all .22- to .50-caliber handguns and rifles; 20- and
12-gauge shotguns and muzzleloaders"

It also comes with:
" The Alignment Verification System Reflective Target, lets you quickly verify scope alignment
in the field according to your recorded information.

Unit contains:
Laser body with shaft extension
Container of rubber o-ring MA-2 bore adapters
MA-3 20 & 12-gauge shotgun adapter
Reflective target
Three #357 batteries
Storage case
Instructions.
answered 4 years, 4 months ago
Customer avatar
by
CabelasExpert11
+7points
7out of 7found this answer helpful.
answer 2
scope leveler, BTS software program, adapters & O-rings to fit 22 to 50 Cal & 12 &20 Ga shotguns
Age: 65 and over
Gender: Male
answered 4 years, 2 months ago
Customer avatar
by
trapperlou
AZ
+2points
2out of 2found this answer helpful.
answer 3
O rings to fit different calibers, 2 different screw on adapters, scope alignment verification system, scope leveling target, and case.
Age: 65 and over
Gender: Male
answered 4 years, 3 months ago
Customer avatar
by
DandyDonfromKY
Lakewood WA
+2points
2out of 2found this answer helpful.
Question

will this boresight work on .204 cal. rifle?

Age: 56-65
Gender: Male
asked 4 years, 1 month ago
Customer avatar
by
Ksjack
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Site Lite SL-100 Boresighter (712123) works for calibers .22 through .50, 20 gauge shotgun, and 12 gauge shotgun. It will not work with the .204 caliber.
answered 4 years, 1 month ago
Customer avatar
by
CabelasExpert4
0points
0out of 0found this answer helpful.
answer 2
The steel portion of the SL 100 that enters the bore (no o-rings in place) mics to 0.2085". Draw your own conclusions.....
Country: United States
State: California
Age: 65 and over
Gender: Male
answered 3 years, 10 months ago
Customer avatar
by
KD6T
0points
0out of 0found this answer helpful.
answer 3
Yes, it will. This boresighter will work on a wide range of calibers.
Country: United States
State: Michigan
Age: 46-55
Gender: Male
answered 3 years, 11 months ago
Customer avatar
by
pjslyfox
+1point
1out of 1found this answer helpful.
Question

Will this work on a .17 rifle

Country: Canada
Province: Ontario
asked 3 years, 6 months ago
Customer avatar
by
gadgetglim
on Site Lite SL-100 Boresighter
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
The Site Lite SL-100 Boresighter, Item IK-712123, will not work with a .17 caliber rifle.
answered 3 years, 6 months ago
Customer avatar
by
CabelasExpert34
+3points
3out of 3found this answer helpful.
answer 2
no..22 and up
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
0points
0out of 0found this answer helpful.
answer 3
no
Country: United States
State: Missouri
Age: 56-65
Gender: Male
answered 2 years, 4 months ago
Customer avatar
by
irishfish
0points
0out of 0found this answer helpful.
1 2 next>>