Do these boots meet the ASTM F2412-11 and F2413-11 standard?
F2412-11 defines the test methods that measure the resistance of protective footwear to a variety of hazards that can potentially result in injury in the workplace.
F2413-11 defines the minimum performance requirements protective footwear must meet to resist a variety of hazards that can potentially result in injury in the workplace,
IMPACT (I/75) resistance for the toe area of footwear.
Class I/75 footwear retains a .500 inch (1/2 inch) for men’s and .468 inch (15/32 inch) for women’s or greater
clearance after a nominal impact of 75 foot-pounds (101.7J), i.e., a 50 pound weight dropped from 23.25 inches reaching
117.9 ± 2.4 inches per second velocity at impact.
COMPRESSION (C/75) resistance for the toe area of footwear.
Class C/75 footwear retains a .500 inch (1/2 inch) after compression of 2500 lbs. (11,121 N) or greater.
METATARSAL (M/75) [impact and compression] resistance for the area of footwear.
Class Mt/75 footwear retains a 1.0 inch clearance for men’s and 15/32 inch clearance for women’s,
after a nominal impact of 75 foot pounds (101.7J), i.e., a 50 lb. weight dropped from 23.25 inches reaching 117.9 ± 2.4 inches
per second velocity at impact 3.5 inches in from the toe of the footwear (3.375 inches on womens).
ELECTRIC HAZARD (EH) resistance of the footwear.
EH constructed or manufactured footwear with electric shock resisting soles and heels capable of withstanding
an application of 18,000 volts (root mean square (RMS) value) at 60 Hz for 1 minute with no current flow or leakage current
in excess of 3.0 milliamperes under dry conditions.
STATIC DISSIPATIVE (SD) properties of the footwear.
SD constructed or manufactured footwear will provide for a resistance of between 106 (1 meg ohm) and
108 (100 meg ohms) resistance when 50 volts are applied via an electrode to the hand of a person wearing the SD test sample
on a conductive ground plate.
PUNCTURE RESISTANCE (PR) properties of footwear bottoms.
PR constructed or manufactured footwear with sole and heel area capable of withstanding a force load of less than 1200N (270 lbf).
Country: United States
asked 5 months, 3 weeks ago
on Cabela's Lace-To-Toe GORE-TEX® Steel-Toe Work Boots
Answer this question
0out of 0found this question helpful.